【US】3 Axis CNC GRBL Offline Controller for 1610 3018 4540 3020 Series CNC Route

Description

Product Description
Package include
1 set of GRBL offline controller
1 set of cable
1 set of SD card
Specifications
Connection: USB (USB-CH340)
Software: GRBL controller, Universal Gcode Sender
Master chip: atmel 328P (arduino nano)
Stepper motor driver: A4988
Spindle drive chip: MOSFET, the highest 60V (recommendation within 48V, current :within 10A )
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)
Laser engraving: Support
Functions
Control X, Y, Z-axis moving
Control spindle on/off
Adjust spindle speed, step
Please Note
Router cannot be connected to the Offline Controller and by a USB cable at the same time:
1.Before connecting the Offline Controller disconnect the USB cable from the router
OR
2.Before connecting the USB cable disconnect the Offline Controller from the router
Easy to connect
Connect the offline module to the GRBL controller board, then use it to control the CNC rounter
Support SD and TF card
Support SD card and TF card at the same time, standard capacity 1G.No need to connect a computer, this can download the required engraving files to the offline controller (available USB or TF card reader).
1.Main Page
Ctrl: Machine Control;
File: Use the Gcode file;
Press [Y+] [Y-] to select; Press[Ok] to Enter
2.Control Page
X± Y± Z±: Moving Axis
OK/Spindle: Spindle ON/OFF
Exit/Step: Change Step/Exit (long press)
How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.
How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.
3.File Page
Common supported formats include nc. tex. tap.
Press [Y+] [Y-] to select file
Press [Ok] to Enter
Press [Ok] to begin if you are ready
Note:Long press [Exit] to stop machining
Press Z+ and Z- , the Z axis will move up and down.
Press X+ and X- , the X axis will move left and right.
Press Y+ and Y- , the Y axis will move Front and Back.
Press SPIN : Spindle on (Laser on ), Spindle off (laser off)
Press SMOD: return
Press Z+ for 5 seconds , change the Language to English.
Press X- or X+ button to switch
Control：Press confirmation button to access manually controlling page
File：Press confirmation button to access file page
Set：Press confirmation button to access setting page
On the off-line controller, buttons control corresponding actions.
SPN is spindle controlling,should press SPIN.
Fan is fan controlling, should press SMOD.
Common supported formats include nc. tex. tap.
Press [Y+] [Y-] to select file
Press [Ok] to Enter
Press [Ok] to begin if you are ready
Note:Long press [Exit] to stop machining
X± Y± Z±: Moving Axis
OK/Spindle: Spindle ON/OFF
Exit/Step: Change Step/Exit (long press)
How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.
How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.
Wide application
Supports 1310, 1610, 3018, 3018 pro ,upgraded 3018 pro etc grbl control cnc machine.
Shipping
Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately
Items will be shipped within 1-2 days upon the receipt of payment.
Problem&Feedback
Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it.
We are a new member in ebay now, and need understand both of sides
Pls email us before you want to leave any negative feedback
Refund
When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos
Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us
Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
Customer’s satisfaction is very important to us.