Wynn's Cylinder Block Seal Repair Cracks Stop Head Gasket Leaks Resists Pressure

Description

Cylinder Block Seal 325 ml.
Wynn's Cylinder Block Seal repairs cracks in cylinder blocks without dismantling.
Forms a glass hard layer when exposed to air.
Repairs cracks in cylinder blocks of cast iron, steel and aluminium, without dismantling.
Stops head gasket leaks.
Assures a permanent repair in 30 minutes.
Resists high pressures, water pressure and vibration.
Does not clog hoses.
Does not repair rubber gaskets (such as cylinder-head gaskets).
APPLICATIONS
Internal and external cracks in cylinder blocks, which lead to external or internal water loss to the oil system or combustion chamber.
In case of severe white exhaust smoke.
In case of coffee coloured oil/water emulsion in the oil system (can be seen on fillercap).
DIRECTIONS
Normal treatment
Replace old liquid by water. Add Wynn’s Cooling System Flush to the water. Let the
engine run for 15 min. Drain this mixture and rinse with water. Refill system with
water. Remove the upper radiator hose and the thermostat. Shake the bottle of
Wynn’s Cylinder Block Seal before use. In cold temperatures, warm the bottle. Pour
Wynn’s Cylinder Block Seal into the opening of the removed thermostat (325 ml treats
circuits up to 8 litres). Replace the dismantled parts to close cooling system again
(thermostat is NOT replaced). Top up liquid level with water. Warm up engine. After
warm-up let the engine run for at least 15 to 20 minutes. Check water temperature during treatment. Stop the engine. Drain when engine is cold and flush completely. Fill with cooling liquid (antifreeze + water). Replace thermostat
Cracks in cylinder wall
Proceed in the same way, but remove the spark plug (petrol) or injector (diesel) from
the damaged cylinder. When several cylinders are damaged, remove the spark plugs
(injectors) sequentially, leaving each one out for 5 minutes.
For large cracks
Proceed in the same way, but leave Wynn’s Cylinder Block Seal in the cooling system
for 3 to 4 days, before draining.
If the product is spilled on glass or paint, remove immediately with clean water.
Use Wynn’s Cooling System Stop Leak to prevent and stop leaks in the radiator
.
Volume: 325 ml
Payment
We accept PayPal only.
Delivery
We only ship to confirmed Ebay addresses.
Items are shipped within 1-3 business days after your payment has been cleared.
Feedback
We greatly appreciate your POSITIVE feedback.
Please DO NOT leave negative feedback without asking for help.
Contact us
Please use only Ebay message to contact us.
Contact us any time, we will try to solve any matters as soon as possible.