Woodpecker Style Dental iLed Curing Light 1 Sec Teeth Whitening System Bleaching

Description

(we will ship the old / new Package randomly)
Introduction:
1.
Technical specifications
：
1.1
Dimensions: 25mm×25mm×240mm
1
.2 Net weight: 2
80
g
1
.3 Power source
1
.3.1 Power supply: rechargeable Lithium battery
1
.3.2 Battery mode: ICR 18490
1
.3.3 Battery voltage and capacity: 3.7V/ 1400mAh
,
Battery has protection against Over-voltage, over-current and short circuit.
1
.3.4 Adapter
Power Input: 100V to 240V, 50Hz/60 Hz
Input Power: 10VA
Power Output: DC5V/1A
1
.4 Light source:
1
.4.1 5W high power blue light LED
1
.4.2 Checking method: the LED light is fine when the light is on during operating correctly.
1
.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M,
Dentsply etc.
1
.4.4 Wave length: 440nm-480nm
1
.5 Light intensity:
P1 mode 2200-3200
mW/
c
m
2
P2 mode 1600
mW/
c
m
2
~
2200
mW/
c
m
2
P3 mode 1200
mW/
c
m
2
~
1600
mW/
c
m
2
2
. Operation
：
2
.1 Press the mode button. Following two modes are available.
2
.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about
3200
mW/
c
m
2
2
.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about
2200
mW/
c
m
2
2
.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0".
2
.3 During operation, the blue light can be stopped by press the power button at any time.
2
.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.
2
.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time.
2
.6 When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging.
2
.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse.
2
.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by
press any button.
2
.9 The depth of solidification of composite is no less than 2mm per 1 second.
Material:
The handle is made of plastic
，
The lamp holder is made of metal
Introduction:
Teeth Whitening Unit is a new type whitening technology, based on the condition of strong blue LED light and whitening kit accelerant. By the character of nanometer pellet on the surface and Light decomposition, activate the most H2O2 in short order on low or normal temperature. Produce mass oxygen atomy permeate teeth and decompose color molecule, to meet effect of teeth whitening.
Feature：
1.The specifically wavelength and high density light speed catalyze whitening gel.
2. 6 powerful LED tubes emit a high intensive cold blue light with an output at 6000 MW/CM2.
3. Special design, innocuous silica gel muzzle, make sure stopping intersectional infection.
4. The new model of power supply make sure steady power output and long-time continuous working even in some cities and places with mutative voltage.
5. Time display could shows treatment time to help dentist master treating time and progress and reduce the waiting time of patient.
Technical Parameter：
1.Power supply: 110-220V±10%, 50HZ/60HZ
2. Power: 18W
3. Light size: 18x74mm2
4. Power density: >60MJ/CM2
5. Light timing: 0~20 mins
6. Power instability <1%
7. Working method: time output & continuous working
8. Coupling: polyester monowave
9. High light intensity model: 6000mw/cm2
10.Low light intensity model: 3000mw/cm2
11. Storage condition:
a. Ambiance temperature: -40 ~ 55°c
b. Relative humidity: ≤95%
Packing List：
1. Teeth Whitening Unit *1pcs
. Manual *1pcs
We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it.
Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.
Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
If the item you received is damaged or defective,Please send message immidately.We will free exchange or refund.
We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.
You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.
Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events.
General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Shipping:Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.
Destination
Delivery Time
Working Days
7-10
10-15
15-25
25-40
>50
US
Item arrived
80%
10%
8%
1%
Refund
ASIA
Item arrived
30%
40%
20%
10%
Refund
EU
Item arrived
20%
20%
50%
10%
Refund
AU
Item arrived
30%
30%
20%
20%
Refund
other countries
Item arrived
5%
10%
10%
60%
--
You feedback is VERY important to us
Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues.
Serivce is our #1 priority at BAISTRA!
If you send message immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped.
We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!