Woodpecker DTE Dental Curing Light 1 Sec Cure Lamp LED B C D F O-Light iLED MAX

Description

Woodpecker DTE Dental Curing Light 1 Sec Cure Lamp LED B C D F O-Light iLED MAX
100% Original Woodpecker
Note: 39.99 and 59.99 dollar product are just Curing Light Head, It's not complete Curing Light.  Pls check it carefully when you buy. thanks
Model:
B Cure Plus:
Original Woodpecker One Cure B-Cure Curing Light 2 Chargers Included
Four working modes: Turbo, Normal, Ortho, Soft, Pulse
Time setting: Turbo: 3S, 5S Ortho: 3Sx10, 5sx10 Normal, Soft, Pulse: 5S, 10S, 20S
Contstant light intensity.
Solidification effect is not effected by the consumption of remaining power
Large capacity battery. A full charge can be used for more than 300 times continuously under 10s working time mode
B-Cure adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time
This product is used for dentistry. It has the function of accelerating the material of dental restoration curing
2 Chargers Included
Three Built in LED's in one light, which can achieve an optimal broadband spectrum of 385 to 515nm
The light absorbing peak of traditional material including camphorquinone: the red line on the figure is 460nm, so the curing can be done by either general curing light or wide spectrum curing light
The B-Cure is equipped with 5W LED.
The Maximum light intensity can reach 2000mw/cm2 with such a small size
Curing normal resin that is thicker than 2mm in three seconds.
Play an important role in cementation of all ceramic restoration and orthodontic bracket. One operation can basically finish the cementation of 2 to 3 brackets, which reduces operations and improves efficiency.
Under soft mode, the power of LED gradually increases, giving a longer gel period for resin to reduce the edge discomfort caused by stress contraction of resin.
Can be autoclaved under 134 degrees Celsius high temperature and 0.22MPa high pressure
Model: LED C
Wireless, the battery can be replaced.
Constant light intensity
The solidification effect is not affected by the consumption of remaining power.
Three working modes: full ramping pulse.
Time setting: 5s, 10s, 15s, 20s.
Large capacity batter.
A full charge can be used for more than 400 times continuously under 10s working time mode.
Low standby power consumption with forty days' standby time.
Technicals:
Power input AC110V 50Hz/60Hz
Light output 1000mW/cm² -1200mW/cm²
Net weight 120g
Dimensions Φ23mm × 263mm
Model: LED D
Wireless.
The battery can be replaced.
Three working modes: Full, Ramping, Pulse.
Time setting: 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.
A full charge can be used for over 400 times. (10s/time)
Constant light intensity, the solidification effect is not affected by the consumption of remaining power.
With wire or wireless. It can run directly on commercial power supply whilst the battery runs out.
Technical Details:
Power input AC110V 50Hz/60Hz
Light output 850mW/cm² - 1000mW/cm²
Net weight 143g
Dimensions 264mm × 32mm × 37mm
Packing List:
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1* Curing light holder
Model: LED F
LED F Plus(2Pcs black light guide rod+1Pc clear teeth whitening tip）
Main features:
Wireless LED Curing Light with Light Meter Tester Function & Teeth Whitening Accelerator & Wide Spectrum
Key Features:
wide Spectrum
Light meter attached.
Built-in fan to avoid heat.
The battery can be replaced.
OLED screen. All angles visible.
Automatic memory. Avoid setting frequently.
Ergonomics design, more comfortable in operation.
Three working modes with three criteria of light intensity. The stable output of light intensity, the solidification effect is not affected by the
consumption of remaining power.
Efficient transfer from electricity into light. A full charge can be used for more than 500 times continuously under 10s working time mode.
Teeth Whitening function
Upgraded wide Spectrum
The emission wavelength range of LED F Plus Wide Spectrum Curing Light is 385nm – 515nm, mainly adding the wave band of 385nm-420nm. The additional band can better cure the resin materials containing new-style photoinitiators such as TPO. For example, restoration materials such as Tetric N – Ceram Bulk Fill (Ivoclar), Amelogen Plus (Ultradent), and ENA Hri (Micerium). The additional wave band can also reduce the risk of resin shedding and incomplete curing.
Especially suitable for orthodontic brackets, porcelain vaneers and post-core adhesives
Technical Details:
Power input AC110V 50Hz/60Hz
Light output 1600mW/cm² -1800mW/cm²
850mW/cm² -1000mW/cm² (Optional)
Net weight 210g
Dimensions 195mm×40mm×150mm
Model: i LED
Power input AC110V 50Hz/60Hz
Power Output: DC5V/1A
Light source: 5W high power blue light LED
Checking method: the LED light is fine when the light is on during operating correctly
He wavelength of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc.
Wave length: 420mm-480mm
Light intensity: 1000mW/cm² ~ 2500mW/cm²
Working Condition:
Environment temperature: +5°C to +40°C
Relative humidity: 30%~75%
Atmosphere pressure: 70kPa to 106kPa
Equipment safety:
Operating mode: intermittent operation
Protection type against electrical shock: class 2
Protection degree against electrical shock: type B
Protection against harmful ingress of water or particular matter: ordinary equipment (1PX0)
Safety in the presence of flammable anesthetic mixture with air, oxygen or nitrous oxide: not suitable under this condition
Operation: Turbo mode: screen shows P1, press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2300mW/cm²~25mW/cm²
Model: i LED MAX
100% original Woodpecker
Wide spectrum, High light intensity, Focused light
Constant power output, born for teeth restoration
360° curing, reach every angle
Fluid design, better hand feeling
Upgraded light intensity
Two modes for option
With the maximum light intensity of 2300mw/cm2
curing 2mm resin in 1 second
Which makes it especially suitable for orthodontic brackets, porcelain verneers and post-core adhensives.
Technical parameter:
Dimensions: 25mm×25mm×240mm
Net weight: 278g
Power Input: 110V, 50Hz/60 Hz
Wave length: 385nm-515nm
Light intensity: 1000 mW/cm2~2500mW/cm2
This product includes -
Original package from the manufacturer
Full Set (Light cure, power unit, and other accessories)
Item description -
1 second curing faster than ever
360 rotatable head
Model: O-Light
Features
- Woodpecker O-Light Curing Light Is a High Tech dental equipment and has a perfect quality assurance system.
- Time Setting: High - 1Sec, 3Sec; Normal - 5 Sec,10Sec,15Sec, 20Sec.
- Constant light intensity : The Solidification effect is not affected by the consumption of remaining power.
- Large Capacity battery : A full charge can be used for more than 400 times continuously under 10s working time mode.
Direction To Use
- STEP 1:Switch on the LED Light Cure Unit with "Power Button".
- STEP 2:Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
- Select the appropriate Time/Mode & start using the LED Light for curing
Technical Specifications
- Adapter Input：AC 100~240V , 50Hz/60Hz, Output： DC 5V1A
- Light Source: High power Blue Light 5W
- Wavelength： 420nm~490nm
- Size: 268.8mm*26.1 mm*31.8mm
- Intensity High: 2300~2500 mw/cm2
- Intensity Normal:1000~1200 mw/cm2
- Net Weight :259g
- Battery Model: ICR 18490
Packing List
- 1 Main unit of the LED
- 1 Light hood
- 1 Adapter
- 1 Bathymeter
- 1 Pedestal charger
- 1 Disposable sleeve
- 1 Instruction manual
- 5 Transparent cover
Model: O-Light MAX
Brand: Woodpecker DTE
Metal Head
Cure 2mm reins in one second
Woodpecker O-Light Curing Light Is a High Tech dental equipment and has a perfect quality assurance system.
Two working modes:
High
Normal
Time Setting:
High - 1Sec, 3Sec
Normal - 5 Sec,10Sec,15Sec, 20Sec
Constant light intensity: The Solidification effect is not affected by the consumption of remaining power.
Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
Note1:
When you charge the lamp, please put the lamp on the base!!!
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name
:
Gilbertmall1009
Shipping from City, State：
Rancho Cucamonga, California,
Contact Information:
909 687 9124 /626 404 5522
Shipping Information:
Most items will be posted out the same day from California, if the payment is received before 3:00 PM (PST) | We ship MONDAY-FRIDAY (Except Holidays).
Returns Information:
We accept returns within 30 days of receiving the item. Please contact us immediately, prior to leaving feedback so that we can help resolve any issues in a timely manner, to the best of our ability. Return Item/s must be received in the same packaging with ALL Original Contents and Labels that were included.