Dental LED Curing Light Lamp Guide Light Density 2700mw/cm2 12W Cure Light

Description

Introduction
Model : JAS-2001B
Operation instruction
1）charge ：
put the
curing light
into the charger socket,the yellow light is on.when it is done the blue light is on . it take about 4-6hours .remove from the power supply after charging.
2). operation details :
press the power button,it is on .press the power button over 2 seconds ,it is off. When it is on, you can set the TIME (from 2-6 seconds ),then press the power button ,it is working;press the power button again ,it stops.
It will turn off automatically without any operation in a few minutes
Parameters
Weight:550g
Input voltage : 100-240V ,50/60HZ
Charger Socket : DC5V
Battery: 3500MAH
Wavelength : 400nm-490nm
Power: 12W
Light density :2700mw/cm
2
Precautions
1） Please change a new lamp guide if it is broken.
2） Disinfection: put the lamp guide to 75% alcohol for a few minutes.
3） Remove adapter from the power supply after charge.
4） Do not touch the battery electrodes by any metal objects, otherwise the battery will be damaged by the short-circuit.
5） It must be charged if it buzzs 5 times or the light will flick, 2. Structure otherwise the battery will be damaged because of the low power.
6）When you switch on the light and it switch off automatically, it only can be used after 1 min due to the overheat protection system.
Packing List
1. LED Curing Light ：1pc
2. Lamp Guide ：1pc
3. Battery ：1pc
4. Charger Socket ：1pc
5 Operation Manual ：1pc
6. Goggles ：1pair
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name:Dentaljoy
City,State:SHENZHEN,China
Telephone number:0755-67530378
Re: K192233
Trade/Device Name: LED Curing Light
Regulation Number: 21 CFR 872.6070
Regulation Name: Ultraviolet Activator for Polymerization
Regulatory Class: Class II
Product Code: EBZ
Dated: December 7, 2019
Received: December 16, 2019