Dental 1sec I LED Curing light lamp machine 3 modles pure blue led power source

Description

1 SEC LED Curing light
Intruduction:
Thanks for choosing our LED light curing light. This instrument takes the high power pure
Blue LED as power source.
It's the new light curing machine which used with enhanced modespot optical fiber light sticks.
LED light curing machine has become popular in the developed countries in European and America.
It has approved the reliability in the light curing machine area. With the light-emitting diodes Blu-ray,
it can cure the resin with the wavelength of 420-480nm, and be use to repair the teeth in the department
Intensity: >=2000mW/c㎡
of stomatology. The light-emitting diodes has long life, which can greatly reduce the costs of
further maintenance of the machine.
Its does not produce any heat when running, so on need to cool it with fan, thus, it is free from the
annoyance of noise and vibration of traditional machines.
It uses the high capacity lithium ion battery. It can be used about 130-200 times after being charged(4-8 hours)
It has the intelligent battery detection circuit function. when battery  is low, it will alarm and light will flash.
Moreover, with no wires, the device is very light. Intensity using a two-stage design, first low-light
irradiation, and then glare repaid curing. this can inhibit  the excessive contraction of the resin surface,
avoid cracks between cavities edge.
The appearance is user-friendly design, which makes the doctor feel more comfortable during operating.
One second cure
Environmental white plastic shell;
10W high power LED;
Strong, flashing, gradually strong 3 modes;
Large capacity lithium batterer;
Shut down automatically without any operation in 40 minutes;
Low batterer warning
Suitable for all brands or resin materials
Long standby time of 90 days or more
Be charged on time, in accordace with each working time of 20 seconds
It can be use continuously for more than  200 times.
Operating Detail
1. power on/off
Press key 1 for starting /shutting  down the machine
2. Program Switch
Long press Key 1, when hear the voice "di" release hand, at the same time
indicator light flashing, the press key to change different working modes. After
choosing appropriate working mode, it will be setted automatically without any
operation in 3 seconds. Then press key1 again, the machine start to work.
3. Strong working indication: irradiation with strong intensity.
4.flashing working indication: irradiation with flashing
5. Gradually strong working indication: irradiation with intensity from low to high
6. charging indication: the light is on when machine is in charging.